[파인만 양자역학] 1-3. 수면파 실험(An Experiment with Waves)
[주의] ------------------------------------------------------------------------------------
파인만 양자역학을 내맘대로 번역하고 약간의 해설을 달아 봤습니다. 한글 해석과 덧붙인 [주]는 저의 개인적인 생각 이므로 그대로 받아 들이진 말아 주세요. 하지만 칭찬, 동의, 반론, 지적등 어떤 식으로든 의견은 환영 합니다.
-------------------------------------------------------------------------------------------
1–3. An experiment with waves
Now we wish to consider an experiment with water waves. The apparatus is shown diagrammatically in Fig. 1–2. We have a shallow trough of water. A small object labeled the "wave source" is jiggled up and down by a motor and makes circular waves. To the right of the source we have again a wall with two holes, and beyond that is a second wall, which, to keep things simple, is an “absorber,” so that there is no reflection of the waves that arrive there.
This can be done by building a gradual sand "beach." In front of the beach we place a detector which can be moved back and forth in the x-direction, as before. The detector is now a device which measures the "intensity" of the wave motion. You can imagine a gadget which measures the height of the wave motion, but whose scale is calibrated in proportion to the square of the actual height, so that the reading is proportional to the intensity of the wave. Our detector reads, then, in proportion to the energy being carried by the wave - or rather, the rate at which energy is carried to the detector.
With our wave apparatus, the first thing to notice is that the intensity can have any size. If the source just moves a very small amount, then there is just a little bit of wave motion at the detector. When there is more motion at the source, there is more intensity at the detector. The intensity of the wave can have any value at all.
We would not say that there was any "lumpiness" in the wave intensity.
파동의 세기(intensity=피동의 높이)에는 "덩어리의 개념(lumpiness)"은 없다고 할 수 있다.
Now let us measure the wave intensity for various values of x (keeping the wave source operating always in the same way). We get the interesting-looking curve marked I12 in part (c) of the figure.
We have already worked out how such patterns can come about when we studied the interference of electric waves in Volume I. In this case we would observe that the original wave is diffracted at the holes, and new circular waves spread out from each hole. If we cover one hole at a time and measure the intensity distribution at the absorber we find the rather simple intensity curves shown in part (b) of the figure. I1 is the intensity of the wave from hole 1 (which we find by measuring when hole 2 is blocked off) and I2 is the intensity of the wave from hole 2 (seen when hole 1 is blocked).
The intensity I12 observed when both holes are open is certainly not the sum of I1 and I2. We say that there is "interference" of the two waves. At some places (where the curve I12 has its maxima) the waves are "in phase" and the wave peaks add together to give a large amplitude and, therefore, a large intensity. We say that the two waves are “interfering constructively” at such places. There will be such constructive interference wherever the distance from the detector to one hole is a whole number of wavelengths larger (or shorter) than the distance from the detector to the other hole.
At those places where the two waves arrive at the detector with a phase difference of π (where they are "out of phase") the resulting wave motion at the detector will be the difference of the two amplitudes. The waves "interfere destructively," and we get a low value for the wave intensity. We expect such low values wherever the distance between hole 1 and the detector is different from the distance between hole 2 and the detector by an odd number of half-wavelengths. The low values of I12 in Fig. 1-2 correspond to the places where the two waves interfere destructively.
You will remember that the quantitative relationship between I1, I2, and I12 can be expressed in the following way: The instantaneous height of the water wave at the detector for the wave from hole 1 can be written as (the real part of) h1eiωt, where the “amplitude” h1 is, in general, a complex number. The intensity is proportional to the mean squared height or, when we use the complex numbers, to the absolute value squared |h1|2. Similarly, for hole 2 the height is h2eiωt and the intensity is proportional to |h2|2. When both holes are open, the wave heights add to give the height (h1+h2)eiωt and the intensity |h1+h2|2. Omitting the constant of proportionality for our present purposes, the proper relations for interfering waves are
I_1 = |h_1|^2,
I_2 = |h_2|^2,
I_12= |h_1 + h_2|^2 ...................................... (1.2)
You will notice that the result is quite different from that obtained with bullets (Eq. 1.1). If we expand |h1+h2|2 we see that
|h_1 + h_2|^2 = |h_1|^2 + |h_2|^2 + 2|h_1||h_2| cosδ ........................... (1.3)
where δ is the phase difference between h1 and h2. In terms of the intensities, we could write
I12 = I_1 + I_2 + 2I_1I_2√cosδ ................... (1.4)
The last term in (1.4) is the "interference term." So much for water waves. The intensity can have any value, and it shows interference.
식 (1.4)의 마지막 항을 "간섭 항(interference term)"이라 한다.
댓글 없음:
댓글 쓰기